Features:

1. Using hi-tech light diffuser, no glare.

2. Longer Life than fluorescents, 5 years.

3. Good light quality and good heat dissipation.

4. Instan start, no flickering, no humming.

5. Special circuit design, each LED work separately,

6. Avoiding the single broker LED influence problem.

7. No fluorescent flickering.

8. No hazard of mercury or lead entering the environment.

Application: 

The commercial application place where need high lux level but soft can clear light quality, 

 such as big shopping mall, hospital, office, factory, school, airport, etc. 

Specifications:

Light Source Test Report

Dimmension(unit:mm)


 

Packing info

           25pcs/ Package, the dimension of package is 1535mmL*200mmW*200mmH,

           the weight of package is 10.5KG.

Installation instructions

Attention
           LED fluorescent tube can be used in the traditional T8, T10 stents. (just) the starter off;

           LED fluorescent tube must use the correct voltage according to specification;

           Do not open the led tube by yourself;

           We recommend you remove the inductive ballast, for indoor use;

           Such led tube cannot replace emergency light

           We recommend that the suitable working temperature should be -20C ~ + 40C for our led

              tube,  if exceed this range, will bring bad situation for product lifetime.

           The product installation & maintenance should be operated by professional workers

Competitive Advantage:

•   high power LED source with low attenuation;
    Low power consumption, highly efficiency, highly antistatic;
    saving energy and protection environment;
    No fluorescent flickering;
    No RF interference, no buzzing noise;
    No coating falling off, color change, anti back flow;
    Blue-ray resistance without human hazard and provide eye protection;
    CE/ROHS/FCC/SGS/ETL approval.